Viewing 3D model

The window allows rotating, zooming and panning model in 3D. This can be done in two different ways using tool buttons and via mouse. The description of tool buttons is given in the figure 2

 

 

1 – Switch on orbit mode

 2 – Switch on selection mode

 3 – Shows rulers in orthogonal view

 4 – Zoom in

 5 – Zoom out

 6 – Zoom window

 7 – Fit model to screen

 8 – Shows model from the top (Z-axis directed toward screen)

 9 – Shows model from the bottom (Z-axis directed from screen)

 10 – Shows model from the left (X-axis directed from screen)

 11 – Shows model from the right (X-axis directed towards screen)

 12 – Shows model from the front (Y-axis directed from screen)

 13 – Shows model from the back (Y-axis directed towards screen)

 14 – Move right

 15 – Move left

 16 – Move up

 17 – Move down

 18 – Rotates model clockwise around screen length

 19 – Rotates model counterclockwise around screen length

 20 – Rotates model clockwise around screen height

 21 – Rotates model counterclockwise around screen height

 22 – Rotates model clockwise in screen plane

 23 – Rotates model counterclockwise in screen plane

 24 – Selection of mesh to be visualized

 25 – Shows edges of model

 26 – Show tangent magnetic intensity plot

 

Figure 2 – Viewing tools